Exis Organizer

Priscila Oliveira - Celestica

Informacion general de los contactos...

Nombre(s):	Priscila
Apellido:	Oliveira
Compañia:	Celestica
	Direccion:Av. Pedregal - Telefono:899-921-5800
Departamento:
Posicion:
Telefono:	(899)921-5800
Ext:	5983
Celular:
Fax:
Email:	piolivei@celestica.com
Eventos:
Comentario:	* IMELDA (Imelda Cota) * February 26, 2008 at 9:13am Hello Miguel , Thank you so much, for all the support. And...I`m so sorry that could be more involved, as well answer your call last friday. But was due a qualification process that we were doing here, so I was really busy! I will analyze all information better now, and I will let you know if I have any doubts. Thank you very much. Have a great night! regards, Priscila I Oliveira * IMELDA (Imelda Cota) * February 11, 2008 at 3:49pm Hello Priscila, Please confirm, do you received the quotation of the X-ray systems?, Do you have any question please let me know. Thanks, Imelda Cota Yucupicio Ing. de Soluciones de Prueba Tel. (656) 623-6380 Fax (656) 617-1562 LADA s/c 01800-627-8858 imelda.cota@existest.com www.existest.com -----Original Message----- From: Miguel Ocaña Allende [mailto:miguel.ocana-allende@metris.com] Sent: Viernes, 08 de Febrero de 2008 02:34 p.m. To: piolivei@celestica.com Cc: 'Yamil Espana'; 'Imelda Cota' Subject: RE: Sistemas de Rayos X de Celestica Hello Priscila, As discussed, please find attached quotes for our Hawk and Revolution system. I am also attaching brochures with specifications of both systems. The main difference between the two systems is the manipulating capabilities for angle views: on the Hawk system, the sample is rotated and tilted and on the Revolution system, the sample remains flat on the system tray while this rotates horizontally and the detector tilts back for angled views. Even though both systems can achieve pretty much the same angle views, on the Hawk only one sample can be tilted and rotated at a time whereas on the Revolution system you can place as many PCB's as possible on the tray and you can get angle views on all the boards. The Hawk also has a large tray for multiple PCB's but the tray is limited to only X/Y/Z movement. As far as system magnification and resolution both systems are the same since both use our Nanotech 160kV x-ray tube. This tube is an improved version of the tube on the Hawk system in Celestica. The new Nanotech tube basically allows for higher resolution. As far as software, both systems use our latest Inspect-X software created by X-Tek. This is the same software that we would install on the Monterrey Hawk. Finally, our systems come with a one-year warranty and at the end of the warranty we also provide service contracts. I hope this information is useful. Please let me know if you have any questions or require more information. Thanks again for your interest in our products. Best regards, Miguel -----Original Message----- From: Miguel Ocaña Allende [mailto:miguel.ocana-allende@metris.com] Sent: Friday, February 08, 2008 12:27 PM To: 'piolivei@celestica.com' Cc: 'Yamil Espana'; 'Imelda Cota' Subject: FW: Sistemas de Rayos X de Celestica Importance: High Hello Priscila, It was nice talking to you today. Following our telephone conversation, we'll send you shortly two quotes for our x-ray inspection systems. One of them will be for a Hawk system, similar to the one at Celestica Monterrey and the other one for a Revolution system which is a newer and more suitable system for your BGA inspection. Please also know that I've just spoken to Yamil España at Monterrey regarding the over-heating issue on his current Hawk. It turns out that the issue was mainly caused by insufficient coolant in the cooling system. Yamil tells me that they have been replenishing the coolant more often now and that the over-heating issue has been resolved. Yamil's telephone number if you need to get more information is 52-8181561500 Ext. 1786. On the other hand, I would like to mention to you that since Celestica has been a corporate customer to Metris/X-Tek for several years, we would like to offer Yamil a full software/hardware upgrade to his system with the purchase of a new system by Celestica Reynosa. Yamil has wanted this upgrade performed on his system for a couple of years now but it has not been approved by Celestica Monterrey. We will be happy to upgrade his system free of charge at no additional cost to Celestica. This upgrade will essentially allow Yamil's system to have the same software and computer hardware as a new Hawk. I hope this information is useful. Thank you again for your interest in our products and we look forward to working with you. Best regards, Miguel Ocaña Allende; X-Tek / Metris P 408 486 9620, F 408 486 9625 Cell 408 483 3128 xtekwest@xtekxray.com - www.xtekxray.com * IMELDA (Imelda Cota) * February 6, 2008 at 2:54pm Hello , Thank you , for your attention . Could you please send me a quotation and the lead time please? Thank you very much. regards, Priscila I Oliveira _______________________________ Process Engineering * IMELDA (Imelda Cota) * February 6, 2008 at 11:23am Estimada Priscila, Soy Imelda Cota de la compañía de X-Tek en México y a través de este medio me pongo a tus órdenes para cualquier información que requieras sobre los sistemas de rayos X. Anexo encontraras información de algunos de los equipos que estamos manejando actualmente, tenemos equipos de sistema de rayor X en 3D. Nos informaron que en este momento estas interesada en un sistemas de rayos X y a través de este medio me pongo a tus órdenes para ofrecerte los servicios y productos que maneja actualmente nuestra compañía brindándote soporte y servicio en nuestros sistemas. Agradeciendo de antemano la atención prestada me despido quedando a tus órdenes. Buen día! Imelda Cota Yucupicio Ing. de Soluciones de Prueba Tel. (656) 623-6380 Fax (656) 617-1562 LADA s/c 01800-627-8858 imelda.cota@existest.com www.existest.com Que tal Miguel. Erik le dio seguimiento el Viernes e investigo que no se presento a trabajar ese dia, y hoy Lunes es dia de descanso obligatorio en Mexico. Mañana temprano le hablara Imelda, y luego te pondra al tanto sobre la aplicación y urgencia del proyecto. Saludos. Arturo Martinez Camacho ________________________________________ From: Miguel Ocaña Allende [mailto:xtekllc@xtekllc.com] Sent: Monday, February 04, 2008 11:05 AM To: 'Arturo Martinez Camacho' Subject: RE: Celestica Reynosa necesita X-ray Que tal Arturo, Habrás tenido oportunidad de contactar a Priscila en Celestica sobre su requerimiento de rayos x? Saludos, Miguel From: Arturo Martinez Camacho [mailto:arturo.martinez@existest.com] Sent: Thursday, January 31, 2008 5:12 PM To: 'Miguel Ocaña Allende' Cc: 'Imelda Cota'; 'Erik' Subject: RE: Celestica Reynosa necesita X-ray Que tal Miguel. Gracias por la informacion. Mañana temprano le damos seguimiento. En cuanto la contactemos te avisaremos cual es la aplicación para ver cual equipo seria el mas apropiado. Te encargo me digas si hay avance en lo de la Expo-Monterrey. Ya nos registramos y estamos en la etapa de planeacion. Saludos Arturo Martinez Camacho ________________________________________ From: Miguel Ocaña Allende [mailto:xtekllc@xtekllc.com] Sent: Thursday, January 31, 2008 5:02 PM To: 'Arturo Martinez Camacho' Cc: 'Imelda Cota'; 'Erik' Subject: FW: Celestica Reynosa necesita X-ray Que tal Arturo, Podrías contactar a Priscila ASAP para ver su requerimiento. Gracias de antemano. Miguel From: horacio muñoz [mailto:horaciomr2000@yahoo.com.mx] Sent: Thursday, January 31, 2008 1:00 PM To: Miguel Ocaña Allende Cc: rogelio_lerma@hotmail.com Subject: Celestica Reynosa necesita X-ray Hola miguel: La ingeniero Priscila Oliveira piolivei@celestica.com de Celestica Reynosa necesita informacion de tus equipos de Rayos X lo mas pronto que puedas ya que estan cotizando en otras partes y les urge el equipo (3D seria buena opcion). Saludos. Horacio M. BRL Baleros y Representaciones Lerma www.brlventas.com HORACIO MUÑOZ R. Technical Support Engineer (614) 415.8067 office